Dr. Robert Phelps
+49 (0) 89 5480177 - 66
Feb 11, 2016
Physicists at the Technical University of Munich (TUM) have developed a nanolaser, a thousand times thinner than a human hair. Thanks to an ingenious process, the nanowire lasers grow right on a silicon chip, making it possible to produce high-performance photonic components cost-effectively. This will pave the way for fast and efficient data processing with light in the future.
Ever smaller, ever faster, ever cheaper – since the start of the computer age the performance of processors has doubled on average every 18 months. 50 years ago already, Intel co-founder Gordon E. Moore prognosticated this astonishing growth in performance. And Moore’s law seems to hold true to this day.
But the miniaturization of electronics is now reaching its physical limits. “Today already, transistors are merely a few nanometers in size. Further reductions are horrendously expensive,” says Professor Jonathan Finley, Director of the Walter Schottky Institute at TUM. “Improving performance is achievable only by replacing electrons with photons, i.e. particles of light.”
Data transmission and processing with light has the potential of breaking the barriers of current electronics. In fact, the first silicon-based photonics chips already exist. However, the sources of light for the transmission of data must be attached to the silicon in complicated and elaborate manufacturing processes. Researchers around the world are thus searching for alternative approaches.
Scientists at the TU Munich
have now succeeded in this endeavor: Dr. Gregor Koblmüller at the
Department of Semiconductor Quantum-Nanosystems has, in collaboration
with Jonathan Finley, developed a process to deposit nanolasers directly
onto silicon chips. A patent for the technology is pending.
Growing a III-V semiconductor onto silicon requires tenacious experimentation. “The two materials have different lattice parameters and different coefficients of thermal expansion. This leads to strain,” explains Koblmüller. “For example, conventional planar growth of gallium arsenide onto a silicon surface results therefore in a large number of defects.”
The TUM team solved this problem in an ingenious way: By depositing nanowires that are freestanding on silicon their footprints are merely a few square nanometers. The scientists could thus preclude the emerging of defects in the GaAs material.
But how do you turn a nanowire into a vertical-cavity laser? To generate coherent light, photons must be reflected at the top and bottom ends of the wire, thereby amplifying the light until it reaches the desired threshold for lasing.
To fulfil these conditions, the researchers had to develop a simple, yet sophisticated solution: “The interface between gallium arsenide and silicon does not reflect light sufficiently. We thus built in an additional mirror – a 200 nanometer thick silicon oxide layer that we evaporated onto the silicon,” explains Benedikt Mayer, doctoral candidate in the team led by Koblmüller and Finley. “Tiny holes can then be etched into the mirror layer. Using epitaxy, the semiconductor nanowires can then be grown atom for atom out of these holes.”
Only once the wires protrude beyond the mirror
surface they may grow laterally – until the semiconductor is thick
enough to allow photons to jet back and forth to allow stimulated
emission and lasing. “This process is very elegant because it allows us
to position the nanowire lasers directly also onto waveguides in the
silicon chip,” says Koblmüller.
Currently, the new gallium arsenide nanowire lasers produce infrared light at a predefined wavelength and under pulsed excitation. “In the future we want to modify the emission wavelength and other laser parameters to better control temperature stability and light propagation under continuous excitation within the silicon chips,” adds Finley.
The team has just published its first successes in this direction. And they have set their sights firmly on their next goal: “We want to create an electric interface so that we can operate the nanowires under electrical injection instead of relying on external lasers,” explains Koblmüller.
“The work is an important prerequisite for the development of high-performance optical components in future computers,” sums up Finley. “We were able to demonstrate that manufacturing silicon chips with integrated nanowire lasers is possible.”
The research was
funded by the German Research Foundation (DFG) through the TUM Institute
for Advanced Study, the Excellence Cluster Nanosystems Initiative
Munich (NIM) and the International Graduate School of Science and
Engineering (IGSSE) of the TUM, as well as by IBM through an
international postgraduate program.
The Bayerische Patentallianz GmbH is offering the technology for licensing.
Monolithically Integrated High-beta Nanowire Lasers on SiliconB. Mayer, L. Janker, B. Loitsch, J. Treu, T. Kostenbader, S. Lichtmannecker, T. Reichert, S. Morkötter, M. Kaniber, G. Abstreiter, C. Gies, G. Koblmüller, und J. J. FinleyNano Letters, 2016, 16 (1), pp 152-156 – DOI
Coaxial GaAs-AlGaAs core-multishell nanowire lasers with epitaxial Gain controlT. Stettner, P. Zimmermann, B. Loitsch, M. Döblinger, A. Regler, B. Mayer, J. Winnerl, S. Matich, H. Riedl, M. Kaniber, G. Abstreiter, G. Koblmüller, und J. J. FinleyApplied Physics Letters, 108, 011108 (2016) – DOI
Continuous wave lasing from individual GaAs-AlGaAs core-shell nanowiresB. Mayer, L. Janker, D. Rudolph, B. Loitsch, T. Kostenbader, Abstreiter, G. Koblmüller, und J. J. Finley; Applied Physics Letters 108, Vol. 8, to appear on Feb. 22nd (2016)
Contact a specific team member via the Team section or simply use our contact form for your request.