Zum Seiteninhalt springen
  • Microbial production of atactic PHB

    B84065

    Microbial production of atactic PHB

    • Sustainable and microbial fermentative production of atactic PHB, which can be applied to any industrial microorganism
    • Compared to natural microbial PHB, atactic microbial PHB is less crystalline and brittle
    • Various carbon sources can be used such as carbohydrates, hydrogen, CO2, and methane
  • Fire-resistant wood by impregnation with cement

    B80005

    Fire-resistant wood by impregnation with cement

    • Use of impregnatable wood types such as beech or pine sapwood
    • Dispersion of ultra fine cement particles and protective agents in glycol
    • Dispersion impregnation by standard vacuum process – subsequent water storage enables hydration inside the wood structure
  • Device for fast parallelized additive manufacturing

    B80011

    Device for fast parallelized additive manufacturing

    • Challenging geometries such as overhang structures can be printed without support structures
    • Ideal method to functionalize objects (e.g. thermal and electrical conductivity, addition of sensors & actuators)
    • Multimaterial objects printable (e.g. surface coatings etc.)
  • Vibration-Resistant Microphone Based on ALTP

    B83091

    Vibration-Resistant Microphone Based on ALTP

    • Effective separation of sound and vibrations
    • No bulky shielding in windy conditions
    • No eigenfrequent resonances of the membrane of a classical microphone
  • Parabolic and wave-shaped cogwheels

    B83202

    Parabolic and wave-shaped cogwheels

    • Improved load capacity allowes higher rotation speeds
    • Homogeneus power distribution
    • Less noise and reduced wear offer comfort and longer lifespan
  • Boosting sensitivity and speed for quantum sensing

    B83077

    Boosting sensitivity and speed for quantum sensing

    • sensitivity increase of 300-500% compared to existing methods
    • lower-power pulse laser, allowing more efficient energy utilization
    • minimal disruption to often heat sensitive biological or chemical samples
    • 10 times faster readout speed
  • Vibration Decoupling for Dilution Refrigerators

    B83028

    Vibration Decoupling for Dilution Refrigerators

    • Possible upgrade for commercial cryostats with minimal impact on sample volume size
    • In dry cryostats, almost no vibrations are transferred to the sample even when the pulse-tube cooler is on
    • Multi-stage thermal insulation and mechanical damping ensure minimal interference from external support
  • Sensor-Independent Autonomous Mobility

    B81122

    Sensor-Independent Autonomous Mobility

    • Less need for retraining with new data as sensors evolve and are replaced
    • Simpler and faster implementation of new sensor models at reduced development costs
    • Factoring in field of view, mounting angle, resolution, and sensor nonlinearity
    • Successfully tested with both camera and LiDAR images
  • Shear cutting: inline measurement of wear and cut quality

    B82142

    Shear cutting: inline measurement of wear and cut quality

    • Can be used independently of material and tool type
    • Instantaneous monitoring of process and cut surface characteristics
    • Maintains optimal tool performance
    • Easy retrofitting
  • LINAC Cavities Made by Additive Manufacturing

    Y20000

    LINAC Cavities Made by Additive Manufacturing

    • Relevant reduction of manufacturing costs
    • Freedom in cavitiy design due to additive manufacturing
    • Optimized cavity geometries reduce LINAC operating costs while increasing operating time and lifetime
    • Innovation can be used in particle accelerators for e.g. radiation therapy, cargo scanning or food
  • Primary sensor for magnetostrictive force measurement

    B79005

    Primary sensor for magnetostrictive force measurement

    • Ideal for "lost sensor" concepts, e.g. for precise bearing adjustment
    • Can potentially deliver data while machines or vehicles are running
    • Extending operating life of bearings, minimizing machine down time and service cost
    • Huge commercial impact, highest customer satisfaction
  • Wavefront sensor for advanced surface metrology

    B81164

    Wavefront sensor for advanced surface metrology

    • Improvement over Shack-Hartmann surface sensing: Absence of microlens array increases resolution
    • Advantageous compared to tactile measurement systems: Contact-free, fast, cost-efficient
    • Construction from readily available components
    • Large slope acceptance angle
  • Contactless measure and visualize planar vibrations

    B81003

    Contactless measure and visualize planar vibrations

    • Multi-material suitable: even for sandwich- and composite, capable for natural materials, plastic and all kinds of metals.
    • Performs complex analyses and inspection tasks or non-destructive in-line quality testing.
    • Standard microphones with simple callibration process - intuitive handling.
    • The variable evaluation enables easy-to-understand graphical illustrations.
  • Moisture sensor for structures and building materials

    B81163

    Moisture sensor for structures and building materials

    • Compensates for material shrinkage
    • For measurements in wood, wood-based materials, concrete, anhydride, plastics and many more.
    • Short-term measurement or permanent monitoring
  • Backflushable gradient bed filter for particle separation

    B80032

    Backflushable gradient bed filter for particle separation

    • Increased filtrate yield and separation efficiency
    • Enormous cost reduction through low running costs, an optimized backflushing process and the use of glas beads as a cost effective and environmentally friendly filter medium
    • Can be easily adapted to the needs of various industrial sectors
  • Light-Driven Microdrones

    B81064

    Light-Driven Microdrones

    • Innovative approach to micromanipulation and -assembly
    • Easy steering with little specialist knowledge
    • Applicable in a wide and diverse range of laboratory settings
  • Auxetic Diameter Regulator

    Y21003

    Auxetic Diameter Regulator

    • Innovative active gap-control mechanism for gas turbines
    • Increased gas-turbine efficiency due to reduced secondary air flow
    • Simple and space-saving design
  • Double Sensor TLP with high time domain resolution

    Y20007

    Double Sensor TLP with high time domain resolution

    • Transient behavior analysis method for power electronics devices
    • Resolution << 1 ns, pulse duration not restricted (>> 10 ns)
    • TLP / vf-TLP add-on procedure with innovative data analysis algorithm
  • Lab on a Chip for rapid testing applications

    B79091

    Lab on a Chip for rapid testing applications

    • Rapid detection of bio-chemical substances in fluids
    • Easy and fast – requires only small amount of testfluid
    • No sample preparation needed
  • Double cutting disc with curved deformation lines

    B76166

    Double cutting disc with curved deformation lines

    • Resonance frequency of the inventive cutting disc shifted to rotational speeds > 30% higher compared to state of the art
    • Kinetic energy increased by 75%
    • Cutting disc can safely be operated at higher rotational speed and longer lifetime
  • Plastics: Polymeric Spider Silk Fibers

    B78127

    Plastics: Polymeric Spider Silk Fibers

    • Technical spider silk, ready for mass production
    • High toughness and tensile strength, light weight
    • Cost-efficient electrospinning from polyacrylnitril (PAN)
  • Hydrophobic mortar

    B75015

    Hydrophobic mortar

    • Hydrophobicity based on bacterial biofilm supplements
    • No need for post-treatment
    • Environmentally friendly
  • Antilock Braking System (ABS) for bicycles

    B77080

    Antilock Braking System (ABS) for bicycles

    • Energy self-sufficient bicycle ABS
    • All system components encapsulated in the front wheel hub
    • Compatible with standard mechanical and hydraulic disc brakes
  • Economical mosfet-multi-level-converter

    B77014

    Economical mosfet-multi-level-converter

    • Economical MOSFET-based Power Converter
    • High Efficiency Electromobility
    • Broad Range and Flexibility of Conversion Applications
  • 3D scattering tensor based on one or two axes of rotation

    B76005

    3D scattering tensor based on one or two axes of rotation

    • Shorter acquisition time and faster reconstruction procedure
    • Full scattering tensor with multiple independent structural parameters for each volume element
    • Visualizing sub-pixel fiber orientations
  • Process for the production of alcohols

    B77074

    Process for the production of alcohols

    • Synthesis gas (e.g. CO, CO2, H2) is converted by microorganisms in a bioreactor
    • cascade of two serially connected stirred-tank reactors
    • Utilization for small application as well as for industrial scale up

52 von 89 Tech Offers

Haben wir Ihr Interesse geweckt?

Finden Sie den richtigen Ansprechpartner auf unserer Team-Seite oder benutzen Sie für Ihre Anfrage einfach das Kontakt-Formular.

Kontakt aufnehmen

Bayerische Patentallianz GmbH
Prinzregentenstr. 52
80538 München

Telefon: +49 (0) 89 5480177 - 0
Fax: +49 (0) 89 5480177 - 99
E-Mail: kontakt@baypat.de

© Copyright 2025 • Bayerische Patentallianz GmbH • All rights reserved

Privatsphäre-Einstellungen

Diese Webseite verwendet Cookies. Cookies verbessern die Nutzung und helfen uns diese Website an Ihre Bedürfnisse anzupassen.
Datenschutzerklärung